To configure EoIP Tunnel settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Network option from the local page.

4. In the Network option, click on EoIP Tunnel Settings and click on it to access the DDNS Settings configuration.

5. To configure the EoIP Tunnel settings on the RCVx3 device, you need to provide the following details for each tunnel. Below is an example for reference:

1.    EoIP Tunnel 1:

o    Enable/Disable: Select whether to enable or disable this tunnel.

o    Remote IP Address: Enter the IP address of the remote device (e.g., 192.168.1.10).

2.    EoIP Tunnel 2:

o    Enable/Disable: Select whether to enable or disable this tunnel.

o    Remote IP Address: Enter the IP address of the remote device (e.g., 192.168.1.20).

3.    EoIP Tunnel 3:

o    Enable/Disable: Select whether to enable or disable this tunnel.

o    Remote IP Address: Enter the IP address of the remote device (e.g., 192.168.1.30).

4.    EoIP Tunnel 4:

o    Enable/Disable: Select whether to enable or disable this tunnel.

o    Remote IP Address: Enter the IP address of the remote device (e.g., 192.168.1.40).

5.    EoIP Tunnel 5:

o    Enable/Disable: Select whether to enable or disable this tunnel.

o    Remote IP Address: Enter the IP address of the remote device (e.g., 192.168.1.50).

Ensure the remote IP addresses correspond to the devices you intend to connect via the EoIP Tunnel.

6. After entering all the required data in the EoIP Tunnel settings, click on the Save button to apply and save your changes.