To configure Advanced Wireless settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Wireless option from the local page.

4. In the Wireless option, click on Advanced and click on it to access the Advanced Wireless Settings configuration.

5. Advanced Wireless Settings in RCVx3 Device

The Advanced Settings section in the Wireless configuration of the RCVx3 device provides a range of parameters that can be customized to optimize wireless performance. Below are the settings available:

a. BG Protection Mode:

o    Select Auto for automatic protection mode adjustment.
Example: Enable BG Protection Mode to improve performance in environments with mixed 802.11b/g devices.

b. Beacon Interval:

o    Specify the interval in milliseconds (ms) for beacon transmission. The range is 20–999 ms, with a default of 100 ms.
Example: Set Beacon Interval to 200 ms to reduce beacon transmission frequency and conserve bandwidth.

c. Data Beacon Rate (DTIM):

o    Configure the DTIM Interval, which determines the frequency of multicast traffic delivery. The range is 1–255, with a default of 3.
Example: Use a DTIM Interval of 1 for applications requiring frequent multicast updates.

d. Fragment Threshold:

o    Set the maximum frame size before fragmentation occurs. The range is 256–2346, with a default of 2346.
Example: Reduce the Fragment Threshold to 1024 in environments with high interference for better reliability.

e. RTS Threshold:

o    Specify the frame size that triggers RTS (Request to Send) signals. The range is 1–2347, with a default of 2347.
Example: Use an RTS Threshold of 500 in networks with frequent collisions.

f. TX Power:

o    Adjust the transmit power percentage. The range is 1–100%, with a default of 100%.
Example: Lower the TX Power to 50% in small areas to minimize interference with other devices.

g. Short Preamble:

o    Enable or Disable short preamble for improved performance in compatible devices.
Example: Enable Short Preamble for devices requiring faster synchronization.

h. Short Slot:

o    Enable or Disable short slot timing to enhance data transmission efficiency.

i. TX Burst:

o    Enable or Disable TX burst mode to increase throughput for continuous data transfer.

j. Pkt_Aggregate:

o    Enable or Disable packet aggregation to optimize data transmission.

k. Country Code:

o    Select the Country Code to configure region-specific wireless settings.
Example: Set Country Code to US for compliance with United States regulations.

l. Support Channel:

o    Configure the supported channels (e.g., Ch1–11) based on the region.

m. Wi-Fi Multimedia (WMM Capable):

o    Enable WMM Capable to prioritize multimedia traffic for better quality of service (QoS).

n. Multiple SSID:

o    Configure up to four SSIDs (e.g., Multiple SSID1, Multiple SSID2) with specific settings for each SSID.

o. APSD Capable:

o    Enable or Disable Automatic Power Save Delivery (APSD) for power-efficient operations on compatible devices.

By adjusting these Advanced Settings, users can tailor the wireless network's performance to meet specific requirements, such as reducing interference, optimizing data rates, or improving power efficiency.

6. After making the necessary changes in the Advanced Settings, click the Save button to apply and save your changes.