How to make settings in Network Time Server on RCVx3 device

1. Log in to your PhoneMDM account at phonemdm.com.

2. Click the below shown Icon to get into the settings of the required device.

3.  After accessing the device configuration settings, select the Management option, which is the third section on the left side.

4. In the Management section, there is an option called NTP (Network Time Server).

5. In the NTP section, you will find the following sub-options:

• NTP Enable/Disable switch: Toggle to enable or disable the Network Time Protocol.
• TimeZone: Select your local time zone (e.g., GMT+1 for Central European Time).
• Server_1_IP: Enter the IP address of the primary NTP server (e.g., 192.168.0.1).
• Server_2_IP: Enter the IP address of the secondary NTP server for redundancy (e.g., 192.168.0.2).
• Sync: Initiate synchronization with the specified NTP servers.
• Daylight Saving Disable/Enable switch: Toggle to enable or disable daylight saving adjustments.
  

6. After entering all the required data in the NTP settings, click the "Save" button to apply your changes. Your Network Time Server is now configured and ready for use.

​

• Related Articles

• How to make changes in VLAN (Virtual Local Area Network) using Local UI

  To configure VLAN settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

• How to make changes in Port settings using Local UI

  To configure Port settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

• How to make changes in Proxy/ Registration on FXS_1/ FXS_2 in RCVx3 device

  To make changes in Proxy/ Registration of RCVx3 device please follow the steps below: 1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device ...

• How to make changes in LAN settings using Local UI

  To configure LAN settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

• How to make Supplementary changes in FXS_1/ FXS_2 on RCVx3 Device

  1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the FXS_1 or FXS_2 option, which is the first and ...