How make changes in Dial plan settings.
1. Log in to your PhoneMDM account at phonemdm.com.
2. Click the below shown Icon to get into the settings of the required device.
2. Click the below shown Icon to get into the settings of the required device.
3. After accessing the device configuration settings, select the Dial plan option, which is the Fourth section on the left side.
4. In the Dial Plan page, there is a section called Area Code. The Area Code section includes the following sub-options:
- Code: Specifies the area code used for dialing. Example: Enter
415for the San Francisco area code. - Line ID: Identifies the line associated with the area code. Example: Set this to
Line 1for the primary line. - Min Length: Defines the minimum length of the phone number that includes the area code. Example: Set this to
10for a 10-digit phone number. - Max Length: Defines the maximum length of the phone number that includes the area code. Example: Set this to
15for a maximum of 15 digits.
5. After configuring all the required settings in the Area Code section, click on the Save button to apply the changes.