To configure Connection Manager settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Network option from the local page.

4. In the Network option, click on Connection Manager Settings and click on it to access the Connection Manager Settings configuration.

5. The Connection Manager settings on the RCVx3 device are divided into two categories: Default Route Selection and WAN Detection Probe. Below is a detailed explanation with examples:

Default Route Selection

This setting allows users to define the priority for network connections.

a. Priority Number 1: Select the preferred connection type from WAN, Wi-Fi 2.4G, 4G, or LTE (e.g., WAN).

b. Priority Number 2: Choose the fallback connection type from Wi-Fi 2.4G, LTE, or OFF (e.g., Wi-Fi 2.4G).

c. Priority Number 3: Select the secondary fallback option from Wi-Fi 2.4G or OFF (e.g., OFF).

WAN Detection Probe

This setting enables users to monitor and maintain WAN stability.

a. Enable/Disable switch: Use this toggle to enable or disable the WAN Detection Probe.

b. Detect Interval: Specify the detection interval in seconds (range: 60–1000 sec, e.g., 120 sec).

c. Ping This IP: Enter the IP address to be pinged for connection validation (e.g., 8.8.8.8).

d. Max Ping Retries: Set the maximum number of ping attempts before declaring the connection unstable (range: 1–100, e.g., 3 retries).

e. Restart LTE Module switch: Toggle to enable or disable automatic restarts of the LTE module in case of failure.

f. Restart LTE Module Interval: Specify the interval for restarting the LTE module in seconds (range: 1–1000 sec, e.g., 300 sec).

Ensure to configure these settings as per your network requirements to maintain optimal connectivity and failover reliability.

6. After entering all the required details in the Connection Manager settings, click on the Save & Apply button to save and apply the changes. This ensures that the configured settings are activated and take effect immediately.

7. After entering all the required details in the Connection Manager settings, click on the Save & Apply button to save and apply the changes. This ensures that the configured settings are activated and take effect immediately.