How to Add radio-1 for 2.4GHz band in RC500

How to Add radio-1 for 2.4GHz band in RC500

To add Radio-1 for the 2.4GHz band on the RC500, please follow these steps:


1. Log in to your PhoneMDM account at phonemdm.com.

2. Click the below shown Icon to get into the settings of the required device.




 3. After accessing the device configuration settings, select the Wireless option, which is the third section on the left side.




 4. In the Wireless section, you will see four options: Radio-1Radio-2MAC Filtering, and Guest Network. Select Radio-1 to access the 2.4GHz page and set up the 2.4GHz network.



5. In the Radio-1 option, the following sub-options are available:

  • 2.4GHz WiFi On/Off: Enable or disable the 2.4GHz WiFi band.
  • Wireless Name (SSID): Enter or modify the Service Set Identifier (SSID), which is the name of your wireless network.
  • SSID Hide: Choose whether to hide the SSID from broadcasting to prevent it from appearing in the list of available networks.
  • Client Isolation: Enable or disable client isolation to restrict devices on the network from communicating with each other.
  • Max Client Connection Allowed: Specify the maximum number of clients that can connect to the 2.4GHz network.
  • Channel: Select the wireless channel to optimize network performance and minimize interference (Recommended to set to Auto for better performance).
  • Auth Mode: Choose the authentication mode for network security (eg., disable, wpa2, mwpa/wpa2).
  • Encryption: Select the encryption type (e.g., TKIP, AES, or TKIP&AES) to secure your network.
  • Password: Enter or change the password for connecting to the network (The Password length should be 8 characters).




6. After entering the required information in the Radio-1 for 2.4GHz on your RC500, click Save to finalize the setup. The router will automatically apply the configurations and reboot. once the reboot is complete Your Radio-1( 2.4GHz) band is now ready for use.


    • Related Articles

    • How to Add radio-2 for 5GHz band in RC500

      To add Radio-2 for the 5GHz band on the RC500, please follow these steps: 1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration ...
    • How to Add MAC Filtering

      To add MAC filtering on the RC500 in PhoneMDM, please follow the steps outlined below. 1. Log in to your PhoneMDM account at phonemdm.com 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device ...
    • How to Add Guest network in RC500

      To add the guest network on the RC500, please follow the steps below: 1. Log in to your PhoneMDM account at phonemdm.com. 2. Click on the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration ...
    • How to Disable 2.4GHz and 5GHz WiFi radio in phoneMDM.

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the Wireless option. 4. Select Radio-1 to access the ...
    • How to Add RC500 device to Phonemdm

      To add an RC500 device to your MDM system, please follow these steps: Access the MDM Website: Open your web browser and enter the URL(https://.phonemdm.com) for the PhoneMDM website. The login page will be displayed. Log In to PhoneMDM: Enter your ...