To configure Advance settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Network option from the local page.

4. In the Network option, locate DDNS Settings and click on it to access the DDNS Settings configuration.

5. To configure the Advance Settings on the RCVx3 device, you need to provide the following details:

• Most NAT Connections (512-8192): Set the maximum number of NAT connections. The default value is 4096. For example, if you expect high traffic, you can increase this to 8192.
• MSS Mode: Choose between Manual or Auto modes. For instance, if you select Manual, you can specify the MSS value explicitly.
• MSS Value (1260-1460): Specify the MSS value, with the default being 1260. For example, set it to 1460 for larger packet sizes if your network supports it.
• Anti-DoS Protection: Enable or disable this feature by selecting Enable or Disable. For example, enabling it enhances protection against Denial-of-Service attacks.
• IP Conflict Detection: Enable or disable this feature. For example, enable this to detect and resolve IP conflicts automatically.
• IP Conflict Detection Interval (0-3600 seconds): Specify the interval for conflict detection checks, with the default set to 600 seconds. For example, reduce it to 300 seconds for more frequent checks.

These settings allow you to tailor the RCVx3 device to your network requirements efficiently.

 6. After entering the required details for the Advance Settings, click the Apply button to save and implement the changes.