To configure Routing settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Network option from the local page.

4. In the Network option, locate DDNS Settings and click on it to access the DDNS Settings configuration.

5. To configure the Routing settings, you need to provide the following details under Static Routing Settings to add a routing rule:

• Destination: Specify the destination network or IP address (e.g., "192.168.1.0").
• Host/Net: Define whether the destination is a Host (specific device) or a Network.
• Gateway: Enter the IP address of the gateway for the route (e.g., "192.168.1.1").
• Interface Switch: Select the interface for the route—LAN, INTERNET, VOICE, TR069, or VPN. For example, choose LAN for local traffic or VPN for virtual private network connections.
• Comment: Add a description for the routing rule (e.g., "Office Network Route").

These settings allow precise control over network traffic flow, ensuring efficient routing for your specific requirements.

6. After entering the required details, click on the Apply button to save the configured Routing settings.

7. After clicking the Apply button, the newly added routing configuration will appear in the Current Routing Table, as shown in the image below. To delete a routing entry, select the desired route from the table and click on the Delete button.