How to make changes in VLAN (Virtual Local Area Network) using Local UI

How to make changes in VLAN (Virtual Local Area Network) using Local UI

To configure VLAN settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot





3. Select the Network option from the local page.

 




 

4. In the Network option, locate VLAN Settings and click on it to access the VLAN Settings configuration.







5. In the VLAN Model configuration, you can select either Custom or Auto mode by toggling the switch, as shown in the image below.



 If you select Auto mode in the VLAN settings, the configuration will be adjusted automatically. However, if you switch to Custom mode, you can manually modify the settings as per your requirements.


    • Related Articles

    • How to make changes in Port settings using Local UI

      To configure Port settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in IPv6 settings using Local UI

      To configure IPv6 settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in LAN settings using Local UI

      To configure LAN settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in VPN using Local UI

      To configure VPN settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in IPv6 WAN settings using Local UI

      To configure IPv6 WAN settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...