How to make changes in Demilitarized Zone (DMZ) using Local UI

How to make changes in Demilitarized Zone (DMZ) using Local UI

To configure VPN settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot





3. Select the Network option from the local page.

 





 

4. In the Network option, locate DMZ Settings and click on it to access the DMZ Settings configuration.


 

5. In the DMZ settings, there is a switch that allows you to Enable or Disable the DMZ functionality. You can toggle this switch based on your requirements and convenience.

 


 

6. After Enabling or Disabling the DMZ, click on Save & Apply to save and implement the updated DMZ settings.


    • Related Articles

    • How to make changes in Port settings using Local UI

      To configure Port settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in IPv6 settings using Local UI

      To configure IPv6 settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in WPS settings using Local UI

      To configure WPS settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in Blacklist settings using Local UI

      To configure the Blacklist Settings in the RCVx3 device, please follow the steps outlined below. 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: ...

    • How to make changes in LAN settings using Local UI

      To configure LAN settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1 2. If you are logging in for the first time, use the default credentials: Username: celestial ...