To configure VPN settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Network option from the local page.

4. In the Network option, locate VPN Settings and click on it to access the VPN Settings configuration.

 5.1. Disable: This option is used to completely disable the VPN functionality on the device.

5.2. PPTP: Selecting this option enables PPTP VPN configuration and displays the following settings:

• Initial Service IP: Specify the server IP address for the PPTP connection.
• For example, 192.168.1.1.
• User Name: Enter the username required to authenticate the PPTP connection.
• For example, vpn_user.
• Password: Provide the password for the specified username.
• For example, password123.
• VPN As Default Route Switch: Enable or disable this switch to determine whether the VPN is set as the default route for network traffic.

5.3. OpenVPN: Selecting this option activates OpenVPN settings and displays the following switches:

• OpenVPN TLS Auth Switch: Enable or disable this switch to activate TLS authentication for OpenVPN.
• OpenVPN TLS Crypt Switch: Toggle this switch to enable TLS encryption for OpenVPN connections.
• VPN As Default Route Switch: Enable or disable this switch to configure OpenVPN as the default route for all network traffic.

6. After adjusting the switch, click the Save & Apply button to save your changes and apply the updated VPN settings.