How to make changes in WDS settings

How to make changes in WDS settings

To configure WDS settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

 





3. Select the Wireless option from the local page.




4. In the Wireless option, click on WDS Settings and click on it to access the WDS Settings configuration.

 

 

5. The WDS Settings include a single option: the WDS Mode Enable/Disable Switch, which allows you to Enable or Disable the WDS mode as required.

 

 

 

6. After making the necessary changes in the WDS Settings, click the Save button to apply and save your changes.

    • Related Articles

    • How to make changes in WPS settings using Local UI

      To configure WPS settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in Port settings using Local UI

      To configure Port settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in IPv6 settings using Local UI

      To configure IPv6 settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: Username: celestial ...

    • How to make changes in Blacklist settings using Local UI

      To configure the Blacklist Settings in the RCVx3 device, please follow the steps outlined below. 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1. 2. If you are logging in for the first time, use the default credentials: ...

    • How to make changes in LAN settings using Local UI

      To configure LAN settings in local web page please follow the steps below: 1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1 2. If you are logging in for the first time, use the default credentials: Username: celestial ...