How to check Syslogs in RCVx3 device.

How to check Syslogs in RCVx3 device.

To check the System Logs, follow these steps:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1 

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

 

 

 


3. Select the Status option from the local page.






4. From the Status section, select Syslogs to open the RCVx3 Syslogs page. This page displays the device’s system log entries (Syslog), which record key events such as service start/stop activity, network status changes, provisioning actions, and error messages—information that is essential for troubleshooting and support.

​

    • Related Articles

    • How to make Supplementary changes in FXS_1/ FXS_2 on RCVx3 Device

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the FXS_1 or FXS_2 option, which is the first and ...

    • Factory reset the device from Local UI

      A factory reset returns the device back to its default factory settings, i.e., it deletes all custom configurations. Below you will find a method of performing a factory reset on RCVx3. To configure Factory Reset using Local UI please follow the ...

    • RCVx3 Powering the Device with a Backup Battery (UPS)

      What You Need • RCVx3 device • Backup battery • Power adapter • \RJ-11 phone cable • (Optional) Ethernet cable Connect & Power On 1. Place the backup battery near the RCVx3 on a stable surface. 2. Plug the AC adapter into a wall outlet and into the ...

    • Fax Setup / SIP Setup / VoIP Setup on FXS1/FXS2 port in Local Webpage

      Get the SIP Credentials from SIP providers(Windstream/Axion etc): Power On device (https://support.qikcell.com/portal/en/kb/articles/rcvx) Login to device at 192.168.3.1 FXS1 Setup (similar for FXS2): Login to device at 192.168.3.1 Navigate to SIP ...

    • How Set SIP Advance Setup on FXS_1/ FXS_2 In RCVx3 device

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the FXS_1 or FXS_2 option, which is the first and second ...