How to Enable LTE settings from TK920 device

How to Enable LTE settings from TK920 device

To enable the LTE settings on your TK920 device, follow the steps below.


1. Switch on your device and allow it to load until the home page opens.

2. Press the Main Menu button to navigate to the Main Menu page, as illustrated in the image below.



3. Once on the Main Menu page, press the down arrow button to select the second option, labeled "LTE settings”.



4. After selecting the LTE settings option from the Main Menu, press the Enter button.





5. On the LTE Settings page, if the LTE settings are currently disabled, click the Switch button to enable them on your device, as shown in the figure below.




6. After clicking the Switch button on the device, the LTE settings will take a few seconds to change from Disabled to Enabled.





7. After successfully initializing the settings, you will see the LTE settings status changed to Enabled.
​

    • Related Articles

    • How to make changes in SIP settings in Device Configuration

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the SIP option, on the left side. 4. In the SIP Settings ...

    • How to make changes in the Extra-Features settings in device configuration

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the Extra-Features option, which is the Sixth section on ...

    • How to Add Account in TK920 device on PhoneMDM

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the Account option, which is the first section on the left ...

    • How to change Settings in Call Waiting.

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the Call Waiting option, which is the second section on ...

    • How to change settings of Power LED.

      1. Log in to your PhoneMDM account at phonemdm.com. 2. Click the below shown Icon to get into the settings of the required device. 3. After accessing the device configuration settings, select the LED option, which is the Ninth section on the left ...