To configure LAN settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Network option from the local page.

4. In the Network option, locate LAN Settings and click on it to access the LAN Settings configuration.

 

5. LAN Settings Overview for RCVx3 Device

The LAN settings on the RCVx3 device provide a comprehensive configuration interface to manage your local network effectively. Below is a detailed explanation of each available setting:

• Local IP Address: The IP address assigned to the RCVx3 device for local network access. For example, 192.168.3.1.
• Local Subnet Mask: Defines the subnet for the local network. For example, 255.255.255.0.
• Local DHCP Server: Allows you to enable or disable the DHCP server functionality on the device. This controls whether the device assigns IP addresses automatically to connected devices.
• DHCP Start Address: Specifies the starting IP address in the range assigned by the DHCP server. For example, 192.168.1.100.
• DHCP End Address: Specifies the last IP address in the range assigned by the DHCP server. For example, 192.168.1.200.
• Primary DNS: The primary DNS server used for resolving domain names. For example, 8.8.8.8.
• Secondary DNS: The secondary DNS server, used as a backup. For example, 8.8.4.4.
• Client Lease Time (0–86400s): Defines how long an IP address is leased to a client device in seconds. For instance, 3600s means the lease will last for 1 hour.
• DHCP Static Allotment: Allows static allocation of IP addresses to specific devices based on their MAC address. You can add, edit, or delete entries in this list.
• For example, to assign 192.168.1.50 to a device with MAC address 00:1A:2B:3C:4D:5E, you would add this entry in the static allotment section.
• DNS Proxy Switch: Enables or disables DNS proxy functionality. When enabled, the device can act as a DNS proxy for the local network.

Example Configuration

To configure your LAN settings:

1.    Set Local IP Address to 192.168.3.1 and Local Subnet Mask to 255.255.255.0.

2.    Enable Local DHCP Server and configure the DHCP Start Address to 192.168.1.100 and DHCP End Address to 192.168.1.200.

3.    Specify Primary DNS as 8.8.8.8 and Secondary DNS as 8.8.4.4.

4.    Add a static allotment entry for a device with MAC address 00:1A:2B:3C:4D:5E to have a fixed IP of 192.168.1.50.

These settings ensure a structured and efficient local network, simplifying device management and enhancing connectivity.

6. After entering all the required data for LAN settings, click on the Save and Apply button to securely save your changes and activate the updated LAN settings for seamless network functionality.