To configure IPv6 WAN settings in local web page please follow the steps below:

1. Open a web browser and enter the URL of the RCVx3 device: 192.168.3.1.

2. If you are logging in for the first time, use the default credentials:

Username: celestial

Password: hellotickiot

3. Select the Network option from the local page.

 

4. In the Network option, locate  IPv6 WAN Settings and click on it to access the IPv6 WAN Settings configuration.

5. In the IPv6 WAN Settings of the RCVx3 device, you can configure and modify the following options:

• Connection Type: Choose from STATIC IPv6, DHCPv6, or PPPoE based on your network requirements.
• For example, select STATIC IPv6 to manually assign an IPv6 address and gateway, or choose DHCPv6 for automatic address assignment.
• DHCPv6 Address Settings: Select either Stateless or Stateful mode.
• For example, use Stateless mode for automatic configuration without maintaining connection state, or choose Stateful mode to track the state of each connection.
• Prefix Delegation Switch: Enable or disable the Prefix Delegation feature using the toggle switch.
• For example, enabling this switch allows the device to assign IPv6 prefixes to downstream networks.
  

6. After configuring these settings, click the Save button to save your changes and activate the updated IPv6 WAN configuration.